The computer-controlled pulser-receiver family (5800PR, 5900PR, 5672RPP-1) incorporates design features to ensure optimal signal response. The pulsers are designed to provide broadband excitation for maximum broadband transducer performance.

Ultrasonic Pulser-Receivers

Pulser architecture ensures fast rise times that when coupled with instrument selectable energy and damping options optimize the excitation pulse for the frequency of inspection. Pulse stability is achieved through the use of a fixed, regulated high voltage source. Each model's broadband receiver is designed with a combination of input attenuation, output attenuation and gain stages for a wide dynamic range, low noise response, and fine resolution sensitivity adjustments. All attenuators use relay switched resistors for accuracy and stability. In addition, high and low pass filters improve main bang recovery and noise response.

Panametrics pulser-receivers provide the perfect building blocks for ultrasonic flaw detection, thickness gaging, materials characterization, and transducer characterization. Local control and instrument memory is ideal for ensuring repeatable results in manual test set ups. With computer control of individual settings through GPIB or RS-232, test parameters may be derived and then programmed for production volume analysis.

Features - 5800PR, 5900PR

• Broadband negative spike excitation is optimized for the frequency band of each instrument. 
• Adjustable pulse energy and damping from a regulated voltage source for optimizing pulse shape 
• Rise times < 1ns are available for ultra high frequency inspection. 
• 100 μjoules of available energy for conventional frequency applications 
• Internal pulse frequency source is crystal stabilized and uses a frequency divider to select PRF rate. 
• External pulser mode allows use of an external pulse generator in conjunction with each instrument's receiver electronics. 
• Superior isolation of receiver from pulser main bang when operating in through transmission mode 
• Multi-position switchable high and low pass filters optimize main bang recovery and noise response. 
• Packaged in a rack-adaptable 16.7" x 3.5" (419 mm x 88.9 mm) instrument cabinet

Two Models To Fit Your Needs

Model 5800PR: 35 MHz (-3 dB) ultrasonic bandwidth is ideal for general purpose ultrasonic testing with a wide variety of metals, plastics, composites and biomedical specimens.

Model 5900PR: 200 MHz (-3 dB) ultrasonic bandwidth permits testing in applications where conventional instruments fail to provide adequate resolution This unit is typically used with broadband transducers in the frequency range of 10 to 125 MHz with thin or non-attenuating materials.

5627RPP-1 Preamplifier

The 5627RPP-1 Remote Pulser Preamp is available as an option for the 5900PR 200 MHz Bandwidth Pulser-Receiver. The 5627RPP-1 permits use of an optimum short cable from the pulser to the transducer to avoid degradation due to attenuation and cable reflections that can occur at long cable lengths. The small, lightweight package can be hand-held or mounted to a structure and drive up to 500 feet of cable back to the 5900PR host receiver for remote applications.

上海如庆电子科技主要经营无损检测设备及周边耗材，超声波探伤仪及超声波探头（直探头、斜探头、单晶直探头、双晶直探头、单晶斜探头、双晶斜探头、软膜探头、保护膜探头、楔块探头、小晶管探头、爬坡探头、导波探头、TOFD探头、相控阵探头）；超声波测厚仪、磁粉探伤仪、黑光灯（紫外线灯）、工业探伤剂、X射线机、工业胶片、暗示红灯、射线报警仪、射线报警灯、显影粉、定影粉、洗片漕、洗片夹、干燥箱、各种标准像质针、增感屏、铅字、铅字袋、单层暗袋、双层暗袋、折叠暗袋、磁性暗袋、对比块、洗片桶、拉环磁铁、方块磁铁、洗片框、观片灯、黑白密度计、警示灯、磁悬液（黑水、红水、黑油、红油）、荧光磁悬液、黑磁稿、红磁稿、反差增强剂、耦合剂、标准探伤试块、TOFD试块、相控阵试块、防锈剂、分散剂、消泡剂、提升力试块、红磁粉、黑磁粉、荧光磁粉、红油磁粉浓缩液、黑油磁粉浓缩液、红水磁粉浓缩液、黑水磁粉浓缩液、荧光粉浓缩液、磁粉喷壶、磁粉标准试片、磁粉标准试块、梨形滴定管、直形滴定管、评片尺、防护衣、防护背心、胶片脱水剂、测振仪、硬度计、合金分析仪、转速表、焊机、粗糙度仪、涂镀层测厚仪、投影仪、液压试验机、电子试验机、材料冲击机、冲击试验低温槽、冲击试样缺口电动拉床、等等主要针对客户：钢结构厂、冶金、钢管厂、航天航空、锅炉厂、科研教育、石化等等