汕超可拆式斜探头5P14 K1可拆式斜探头-上海如庆电子科技有限公司

汕超可拆式斜探头5P14 K1可拆式斜探头|上海如庆电子科技有限公司现货优惠价全国供应

可拆式斜探头

进行斜射探伤用的探头，主要用于横波探伤。斜探头由斜块、压电晶片、吸声材料、外壳、插座等组成。

结构示意图：

斜块：

频率(MHz)	晶片尺寸(mm)	型号	插座
2.5	20	2.5P20 K1.0	C5
		2.5P20 K1.5
		2.5P20 K2.0
		2.5P20 K2.5
		2.5P20 K3.0
		2.5P20 30°
		2.5P20 36.5°
		2.5P20 40°
		2.5P20 45°
		2.5P20 50°
	14	2.5P14 K1.0
		2.5P14 K1.5
		2.5P14 K2.0
		2.5P14 K2.5
		2.5P14 K3.0
		2.5P14 30°
		2.5P14 36.5°
		2.5P14 40°
		2.5P14 45°
		2.5P14 50°
5	20	5P20 K1
		5P20 K1.5
		5P20 K2.0
		5P20 K2.5
		5P20 K3
		5P20 30°
		5P20 36.5°
		5P20 40°
		5P20 45°
		5P20 50°
	14	5P14 K1
		5P14 K2.5
		5P14 K2
		5P14 K2.5
		5P14 K3
		5P14 30°
		5P14 36.5°
		5P14 40°
		5P14 45°
		5P14 50°

*可根据客户需要定做其他规格的探头，详情请。

上海如庆电子科技主要经营无损检测设备及周边耗材，超声波探伤仪、合金分析仪、超声波探头（直探头、斜探头、单晶直探头、双晶直探头、单晶斜探头、双晶斜探头、软膜探头、保护膜探头、楔块探头、小晶管探头、爬坡探头、导波探头、TOFD探头、相控阵探头）；超声波测厚仪、磁粉探伤仪、黑光灯（紫外线灯）、工业探伤剂、X射线机、工业胶片、暗示红灯、射线报警仪、射线报警、显影粉、定影粉、洗片漕、洗片夹、干燥箱、各种标准像质针、增感屏、铅字、铅字袋、单层暗袋、双层暗袋、折叠暗袋、磁性暗袋、对比块、洗片桶、拉环磁铁、方块磁铁、洗片框、观片灯、黑白密度计、警示灯、磁悬液（黑水、红水、黑油、红油）、荧光磁悬液、黑磁稿、红磁稿、反差增强剂、耦合剂、标准探伤试块、TOFD试块、相控阵试块、防锈剂、分散剂、消泡剂、提升力试块、红磁粉、黑磁粉、荧光磁粉、红油磁粉浓缩液、黑油磁粉浓缩液、红水磁粉浓缩液、黑水磁粉浓缩液、荧光粉浓缩液、磁粉喷壶、磁粉标准试片、磁粉标准试块、梨形滴定管、直形滴定管、评片尺、防护衣、防护背心、胶片脱水剂、测振仪、硬度计、合金分析仪、转速表、焊机、粗糙度仪、涂镀层测厚仪、投影仪、液压试验机、电子试验机、材料冲击机、冲击试验低温槽、冲击试样缺口电动拉床、等等主要针对客户：钢结构厂、冶金、钢管厂、航天航空、锅炉厂、科研教育、石化等等
主要代理品牌：美国GE(德国KK) 、美国奥林巴斯OLYMPUS、美国伊诺斯、瑞典兰宝、瑞士博势、汕超、新美达、宏达、船牌、德国MR、德国芬德、德国CHEMAII、柯达、富士、中科、友联、美国福禄克FLUKE 美国泰克、英国德鲁克、中国台湾固纬、中国台湾博计、中国台湾华仪、中国台湾泰仕、中国台湾衡欣、中国台湾先驰、中国台湾路昌、香港CEM、日本、日本NF、日本共立、德国美翠、德国尼克斯、东莞华仪、德国德图、北京普源、深圳鼎阳、深圳优利德、法国CA、香港泰克曼、美国安捷伦（是德）、美国力科、日本万用、日本图技、深圳胜利、南京长盛、常州同惠、常州安柏、美国GMC、美国FLIR、日本白光、时代集团、

美国GE探头|美国GE超声波探伤仪|美国GE超声波直探头|德国KK探头|德国KK超声波探伤仪

直探头|带保护膜探头|欧洲标准保护膜直探头|欧标直探头|美国GE保护膜探头|德国KK带保护膜直探头：
B1S,B2S,B4S,MB2S,MB4S,MB5S,K1G,K2G,K4G,K1N,K2N,K4N,K5N,K5K,K10K,G1N,G2N,G4N,G2KB,G5KB,G5K,G10K,
B1F,B2F,B4F,B5F,MB2F,MB4F,MB5F,MB10F,
双晶直探头：
SEB1,SEB2,SEB4,MSEB2,MSEB4,MSEB5,SEB2KF5,SEB4KF8
原装德国斜探头：
WB45-1,WB45-O1,WB60-1,WB70-1,WB35-2,WB45-2,WB60-2,WB70-2,WB80-2,WB90-2,WB35-4,WB45-4,WB60-4,WB70-4,WB80-4,SWB45-2,SWB60-2,SWB70-2,SWB45-5,SWB60-5,SWB70-5,WK45-1,WK60-1,WK70-1,WK45-2,WK60-2,WK70-2.SWK45-2,SWK60-2,SWK70-2
小尺寸斜探头：
MWB35-2,MWB45-2,MWB60-2,MWB70-2,MWB80-2,MWB90-2,MWB35-4,MWB45-4,MWB60-4,MWB70-4,MWB80-4,MWK45-2,MWK60-2,MWK70-2,MWK45-4,MWK60-4,MWK70-4,
双晶斜探头：
VS45,VS60,VS70,VRY45,VRY60,VRY70,VSY45-2,VSY60-2,VSY70-2,VSY45-4,VSY60-4,VSY70-4,
水浸探头：
Z1N,Z2N,Z4N,Z5N,Z2K,Z4K,Z5K,Z10K,Z5M,Z10M,Z15M,H1N,H2N,H2K,H5K,H10K,H5M,H10M,L1N,L2N,

双晶斜探头|双晶斜探头价格|双晶斜探头销售|美国GE双晶斜探头|德国KK双晶斜探头：
VS45双晶斜探头
VS60双晶斜探头
VS70双晶斜探头
VRY45双晶斜探头
VRY60双晶斜探头
VRY70双晶斜探头
VSY45-2双晶斜探头
VSY60-2双晶斜探头
VSY70-2双晶斜探头
VSY45-4双晶斜探头
VSY60-4双晶斜探头
VSY70-4双晶斜探头

奥林巴斯整合角度声速探头|奥林巴斯OLYMPUS整合角度声速探头

Integral Angle Beam Transducers

Freq. MHz	Nominal Element Size mm	Angle (°)	Near Field in steel mm	Transducer Part #	Typical Bandwidth	Connector (%)	Connector Location	Outline #
1	20 x 22	45	45	AM1R-20X22-45	55	LEMO® 01	Right Angle	9
	20 x 22	60	45	AM1R-20X22-60	55	LEMO 01	Right Angle	9
	20 x 22	70	45	AM1R-20X22-70	55	LEMO 01	Right Angle	9
2	8 x 9	45	15	AM2R-8X9-45	40	LEMO 00	Right Angle	6
	8 x 9	45	15	AM2S-8X9-45	40	LEMO 00	Straight	7
	8 x 9	60	15	AM2R-8X9-60	40	LEMO 00	Right Angle	6
	8 x 9	60	15	AM2S-8X9-60	40	LEMO 00	Straight	7
	8 x 9	70	15	AM2R-8X9-70	40	LEMO 00	Right Angle	6
	8 x 9	70	15	AM2S-8X9-70	40	LEMO 00	Straight	7
	14 x 14	45	39	AM2R-14X14-45	45	LEMO 00	Right Angle	8
	14 x 14	60	39	AM2R-14X14-60	45	LEMO 00	Right Angle	8
	14 x 14	70	39	AM2R-14X14-70	45	LEMO 00	Right Angle	8
	20 x 22	38	90	AM2R-20X22-38	40	LEMO 01	Right Angle	9
	20 x 22	45	90	AM2R-20X22-45	40	LEMO 01	Right Angle	9
	20 x 22	60	90	AM2R-20X22-60	40	LEMO 01	Right Angle	9
	20 x 22	70	90	AM2R-20X22-70	40	LEMO 01	Right Angle	9
4	8 x 9	38	30	AM4R-8X9-38	40	LEMO 00	Right Angle	6
	8 x 9	45	30	AM4R-8X9-45	40	LEMO 00	Right Angle	6
	8 x 9	45	30	AM4S-8X9-45	40	LEMO 00	Straight	7
	8 x 9	60	30	AM4R-8X9-60	40	LEMO 00	Right Angle	6
	8 x 9	60	30	AM4S-8X9-60	40	LEMO 00	Straight	7
	8 x 9	70	30	AM4R-8X9-70	40	LEMO 00	Right Angle	6
	8 x 9	70	30	AM4S-8X9-70	40	LEMO 00	Straight	7
	20 x 22	45	180	AM4R-20X22-45	40	LEMO 01	Right Angle	9
	20 x 22	60	180	AM4R-20X22-60	40	LEMO 01	Right Angle	9
	20 x 22	70	180	AM4R-20X22-70	40	LEMO 01	Right Angle	9
5	14 x 14	45	88	AM5R-14X14-45	40	LEMO 00	Right Angle	7
	14 x 14	60	88	AM5R-14X14-60	40	LEMO 00	Right Angle	7
	14 x 14	70	88	AM5R-14X14-70	40	LEMO 00	Right Angle	7
6	3 x 4	45	N/A	AM6S-3X4-45	38	Microdot®	Straight	10
	3 x 4	60	N/A	AM6S-3X4-60	38	Microdot	Straight	10
	3 x 4	70	N/A	AM6S-3X4-70	38	Microdot	Straight	10

DGS diagrams are included with all Integral Angle Beam Transducers except AM6S-3x4-45, AM6S-3x4-60 and AM6S-3x4-45.

奥林巴斯双晶探头|奥林巴斯OLYMPUS双晶速探头

Dual Element Transducers

Freq MHz	Nominal Element Size mm	Transducer Part #	Focus in Steel mm	Typical Bandwidth (%)	Connector	Connector Location	Outline #
2	7 x 18	DL2R-7X18	15	50	LEMO 00 (2)	Right Angle	2
	7 x 18	DL2R-7X18-0	30	50	LEMO 00 (2)	Right Angle	2
	11	DL2R-11	8	48	LEMO 00 (2)	Right Angle	1
4	3.5 x 10	DL4R-3.5X10	10	45	LEMO 00 (2)	Right Angle	1
	6 x 20	DL4R-6X20	12	48	LEMO 00 (2)	Right Angle	2
	6 x 20	DL4R-6X20-0	25	48	LEMO 00 (2)	Right Angle	2

DL2R-7X18 (left image), DL4R-3.5X10 (right image)

DGS diagrams are included with all Dual Element Transducers.

奥林巴斯保护膜探头|奥林巴斯OLYMPUS保护膜探头

Protected Face Transducers

PF2R-10 (left image), PF4R-24 (right image)

Freq. MHz	Nominal Element Size mm	Transducer Part #	Near Field mm	Typical Bandwidth (%)	Connector	Connector Location	Outline #
1	24	PF1R-24	23	45	LEMO 1	Right Angle	12
1	24	PF1S-24	23	45	LEMO 1	Straight	11
2	10	PF2R-10	7.2	45	LEMO 00	Right Angle	13
	24	PF2R-24	45	45	LEMO 1	Right Angle	12
	24	PF2S-24	45	45	LEMO 1	Straight	11
4	10	PF4R-10	15.6	35	LEMO 00	Right Angle	13
	24	PF4R-24	91	30	LEMO 1	Right Angle	12
	24	PF4S-24	91	30	LEMO 1	Straight	11

DGS diagrams are included with all Protected Face Transducers.

Atlast Transducer 32 mm

Protective Membrane Accessories

PM-24-12 (left image), MRN-24 (right image)

Description	Fits With Nominal Element Size	Part Number
	mm
Set of 12 Membranes	10	PM-10-12
Set of 12 Membranes	24	PM-24-12
Retaining Ring	10	MRN-10
Retaining Ring	24	MRN-24

奥林巴斯接触式探头|奥林巴斯OLYMPUS接触式探头

Contact Transducers

Freq. MHz	Nominal Element Size mm	Transducer Part #	Near Field mm	Typical Bandwidth (%)	Connector	Connector Location	Outline #
2	10	CN2R-10	7.2	85	LEMO® 00	Right Angle	3
2	24	CN2R-24	45	85	LEMO 00	Right Angle	4
4	10	CN4R-10	15.6	85	LEMO 00	Right Angle	3
4	24	CN4R-24	91	85	LEMO 00	Right Angle	4
5	5	CN5R-5	5	60	Microdot	Right Angle	5
10	5	CN10R-5	10	60	Microdot	Right Angle	5

CN2R-24

DGS diagrams are currently not available for Contact Transducers.

Advantages:

Heavily damped broadband design provides excellent time resolution
Short wavelengths for superior flaw resolution capabilities
Focusing allows for very small beam diameters
Frequencies range from 20 MHz to 225 Mhz

High Frequency Contact

Permanent fused silica delay line allows for flaw evaluation, material analysis or thickness measurements using a direct contact testing method
Three different delay line configurations (BA, BB, BC) allow for various combinations of delay line echoes
Standard connector style is Right Angle Microdot® (RM)

Transducer Dimensions (in inches)

Click image to enlarge diagram.

Delay Style	(A)	(B)	(C)
BA	0.72	0.81	1.00
BB	0.34	0.44	0.81
BC	0.34	0.44	0.63

Transducer Configurator

Please contact us for transducers in higher frequencies.

Frequency (MHz)	in.	mm	Part / Item No.
Frequency (MHz)	Nominal Element Size		VIDEOSCAN
20	0.25	6	V212-BA-RM U8411009 V212-BC-RM U8411011 V212-BB-RM U8411010
30	0.25	6	V213-BB-RM U8411021 V213-BA-RM U8411020 V213-BC-RM U8411022
50	0.125	3	V215-BA-RM U8411026 V215-BB-RM U8411027 V215-BC-RM U8411028
50	0.25	6	V214-BC-RM U8411025 V214-BA-RM U8411023 V214-BB-RM U8411024
75	0.125	3	V2025 U8415045
75	0.25	6	V2022 U8415044
100	0.125	3	V2012 U8415043 V2054 U8415046
125	0.125	3	V2062 U8415047

High Frequency Standard Immersion Case

Permanent fused silica delay line
Focused units use an optical quality ground lens
F202 adaptor allows fixturing with a passive UHF connector and an active Microdot® style connector (see page 38)
Combines high frequency with a small case design

V358-SU diagram

Transducer Configurator

Frequency (MHz)	in.	mm	Part / Item No.
Frequency (MHz)	Nominal Element Size		VIDEOSCAN
20	0.25	6	V354-SU U8423057 V372-SU U8423058 V373-SU U8423059 V374-SU U8423060
30	0.25	6	V376-SU U8423081 V375-SU U8423080 V377-SU U8423082 V356-SU U8423078
50	0.25	6	V358-SU U8423079

High Frequency SU/RM Immersion Case

Permanent fused silica delay with an optical quality ground lens provides a high degree of precision in beam alignment and focusing
Stainless steel case has a passive Straight UHF (SU) connector and an active Right Angle Microdot (RM) connector
Large cases allow for larger delay lines and decrease in delay reverberations and noise

*Transducers create surface waves in steel, titanium and other materials with similar velocities. Please contact us for higher frequency. Lightweight High Frequency transducers are an alternative to the SU/RM case style transducers. They offer a smaller case width and lighter weight without sacrificing performance.

Transducer Configurator

Frequency (MHz)	in.	mm	Part / Item No.
Frequency (MHz)	Nominal Element Size		VIDEOSCAN
50	0.125	3	V3332 U8424006
50	0.25	6	V3192 U8424001 V3193 U8424002 V3409 U8424012 V390-SU/RM U8423084 V3330 U8424005 V3337 U8424007
75	0.25	6	V3320 U8424004 V3349 U8424009
90	0.25	6	V3512 U8423247
100	0.125	3	V3346 U8424008
100	0.25	6	V3194 U8424003 V3394 U8424010 V3534 U8424013

Calibration Blocks

All blocks are checked dimensionally using measuring equipment traceable to the National Institute of Standards and Technology, NIST. The most commonly required calibration blocks are listed below.

Type	Part Number	Description	Case
ASTM E164 Calibration IIW-Type Block	TB7541-X	Meets AASHTO and AWS Type 1 block requirements. Calibrates distance and sensitivity settings. Measure refracted angle and sound exit point of angle beam transducers. U.S. customary units (inches).	F129
	TB1136-X	U.S. customary units (inches) block with Lucite® plug	F129
	TB1054-X	Metric Units	F129
	TB1137-X	Metric Units block with Lucite® plug	F129
US Air Force IIW-2 Calibration Block	TB5939-X	IIW-type block per U.S. Air Force NDI Manual T.O. 33B -1-1. Includes 2" and 4" radius cutouts for distance calibration. No. 3, No. 5 and No. 8 side drilled holes, and distance calibration marks to the 2" hole.	F129
RC AWS Block	TB7543-X	Determining resolution capabilities of angle beam transducers per AWS and AASHTO requirements.	F157
SC AWS Block	TB7545-X	Sensitivity and refracted angle calibration per AWS and AASHTO requirements.	F158
DC AWS Block	TB7547-X	Distance and beam index calibration for angle beam transducers per AWS and AASHTO requirements.	F159
DSC AWS Block	TB7549-X	Distance, sensitivity, refracted angle and beam index calibration for angle beam transducers per AWS and AASHTO requirements.	F160
DS AWS Block	TB7551-X	Calibration block for horizontal linearity and dB accuracy procedures per AWS and AASHTO requirements.	F161
30FBH Resolution Reference Block	TB7160-X	Evaluate near surface resolution and flaw size/depth sensitivity of UT equipment. No. 3, No. 5 and No. 8 ASTM flat bottom holes at ten metal travel distances from 0.050" to 1.250".	Included
NAVSHIPS Block	TB7567-X	Contains six No. 3 side drilled holes. Used for distance-amplitude calibration per NAVSHIPS 0900-006 -3010.	F162
ASTM E164 MAB Block	TB7150-X	Miniature Angle Beam (ROMPAS) Block. Distance, beam index, refracted angle and sensitivity calibration. One inch thick.	F197
ISO 7963 Steel	TB1065-X	Miniature Angle Beam Block Distance, beam index, refracted angle and sensitivity calibration. 25 mm thick.	F197

Replace the "X" in the part number with the appropriate number listed below to signify block material: 1 = 1018 Steel, 2 = 4340 Steel, 4 = 7075-T6 Aluminum, 5 = 304 Stainless Steel, 8 = 6-4 Titanium

Reference Blocks

We offer commonly used sets of reference blocks recommended by ASTM standards. These sets are all manufactured to ASTM E127 and ASTM E428 physical dimensions requirements. All reference blocks are provided with an ultrasonic response curve. We can provide, by special order, materials not listed and individual reference blocks. Contact us for more information regarding materials not listed, custom calibration blocks, or quotations on blocks not listed in this section.

Type of Set*	Part Number	Description of Set
Distance- Area Amplitude Set	TB6100-X	Set of 10 ASTM E 127 (7075 Alum) or ASTM E 428 (all other materials) basic set consisting of 3/64 at 3", 5/64 at 1/8", 1/4", 1/2", 3/4", 1-1/2", 3", and 6", and 8/64 at 3" and 6". This set is used for determining Dead Zone, Sensitivity, Distance and Area Amplitude Linearity Measurement.
Area- Amplitude Set	TB6200-X	Set of 8 ASTM E 127 (7075 Alum) or ASTM E 428 (all other materials) Area Amplitude Set consisting of 1/64, 2/64, 3/64, 4/64, 5/64, 6/64, 7/64, and 8/64 Flat Bottom Holes at 3". This set is used to determine the relationship between flaw size and echo amplitude by comparing signal response.
Distance- Amplitude Set-No. 3FBH	TB6303-X	Set of 19 ASTM E 127 (7075 Alum) or ASTM E 428 (all other materials) Distance Amplitude Set. All Flat Bottom Holes are the same and metal travel distances are 1/16", 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/4", 1-3/4", 2-1/4", 2-3/4" 3-1/4", 3-3/4", 4-1/4", 4-3/4", 5-1/4", and 5-3/4". This set is used to determine the relationship between metal distance and signal amplitude by comparing signal responses obtained.
Distance- Amplitude	TB6305-X	1/16"	1/2"	1"	2-1/4"	3-1/4"	4-1/4"	5-1/4"
Set-No. 5FBH		1/8"	5/8"	1-1/4"	2-3/4"	3-3/4"	4-3/4"	5-3/4"
Distance- Amplitude	TB6308-X	1/4"	3/4"	1-3/4"
Set-No. 8FBH		3/8"	7/8"
Sensitivity- Resolution Set	TB6025-X	Set of 9 ASTM E 127 (7075 Alum) or ASTM E 428 (all other materials) consisting of 1/64 at 3"9, 2/64 at 3", and 5/64 at 1/8", 1/4" 3/8", 1/2", 3/4" 1" and 1-1/2", and 1 ASTM E 317 Horizontal and Vertical Linearity Block used to evaluate the sensitivity, entry surface resolution, and horizontal and vertical linearity characteristics of UT equipment.

Replace the "X" in the part number with the appropriate number listed below to signify block material: 1 = 1018 Steel, 2 = 4340 Steel, 4 = 7075-T6 Aluminum, 5 = 304 Stainless Steel, 8 = 6-4 Titanium

Thickness Calibration Blocks

Blocks are held to tighter tolerances than called out in ASTM E797 Code.

Part Numbers	Material	Steps
2211E	304 Stainless Steel	0.100", 0.200", 0.300", 0.400", 0.500"
2211M	304 Stainless Steel	2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm, 12.5 mm
2212E	1018 Carbon Steel	0.250", 0.500", 0.750", 1.00"
2212M	1018 Carbon Steel	6.25 mm, 12.5 mm, 18.75 mm, 25 mm
2213E	7075-T6 Aluminum	0.100", 0.200", 0.300", 0.400", 0.500"
2213M	7075-T6 Aluminum	2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm, 12.5 mm
2214E	1018 Carbon Steel	0.100", 0.200", 0.300", 0.400", 0.500"
2214M	1018 Carbon Steel	2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm, 12.5 mm

汕超可拆式斜探头5P14 K1可拆式斜探头

Integral Angle Beam Transducers

Dual Element Transducers

Protected Face Transducers

Protective Membrane Accessories

Contact Transducers

Advantages:

High Frequency Contact

Transducer Dimensions (in inches)

Transducer Configurator

High Frequency Standard Immersion Case

Transducer Configurator

High Frequency SU/RM Immersion Case

Transducer Configurator

Calibration Blocks

Reference Blocks

Thickness Calibration Blocks

化工仪器网