上海如庆电子科技有限公司优惠价供应产品，请！
The HSMT-Compact is a light, small, and versatile manual one-axis encoded scanner. It can be used -with up to four probes- on plates and for circumferential scans on pipes as small as 4 in. schedule (4.5 in. OD). The scanner length can be changed and the frame can extend outside the limit of the wheels, providing a configuration that is well suited for hard-to-reach places such as pipe-to-component welds.
The HSMT-Compact completes the HSMT family. While the HSMT-Flex and HSMT-X03 are designed for construction welding inspection, the HSMT-Compact is designed for maintenance weld inspection.
HSMT-Compact Kit Includes:
- Scanner frame with handles
- Additional frame bars: 400 mm (16 in.) and 600 mm (24 in.)
- Four magnetic, plastic-covered wheels
- Waterproof, spring-loaded wheel encoder
- OmniScan-compatible encoder with 5 m cable
- Four 90° probe holder brackets
- Four spring-loaded arms (SLA)
- Four TOFD/PE yokes (31.75 mm)
- Two phased array yokes (40 mm)
- Irrigation tubing and accessories
- Two metric/U.S. rulers
- Hard carrying case
Note: Probes and wedges are not included in the basic kit.
Configurations
A typical configuration includes two phased array probes and a pair of TOFD probes, to comply with ASME code.
Other configurations include:
- 1 pair of TOFD probes
- 2 pairs of TOFD probes
- 2 PA probes
Options
Manual Water Pump Kit
Water pump is compatible with scanner umbilical cables. It can also be used with provided tubing. Includes tank, tubing, and Y-splitters (part number: OPIX105).
TRPP 5810 Remote Pulser/ Preamplifier
Four-channel 40 dB Remote Pulser/Preamplifier with LEMO® connectors to amplify probe and instrument output signals. Using the TRPP 5810 and composite probes enhances the S/N ratio in TOFD inspections.
The TRPP 5810™ unit is a high-performance remote pulser/preamplifier dedicated to TOFD inspections and compatible with the Olympus scanner line as well as PV-100 and PV-200 weld-inspection systems.
This remote pulser/preamplifier provides an optimum signal-to-noise ratio for TOFD inspections by combining a 40 dB preamplifier with a remote high-voltage (200 V) pulse repeater in a single, small enclosure. The TRPP 5810 supports two UT channels, enabling simultaneous inspection with one or two pairs of TOFD probes.
The TRPP 5810 can be used as a pulser and/or preamplifier.
TRPP 5810 as a Pulser
- Provides an additional pulse gain in order to generate a stronger signal when needed to reveal difficult-to-detect flaws.
TRPP 5810 as a Preamplifier
- Provides the additional gain or broadband signal-to-noise enhancement necessary for optimum signal acquisition on thick sections of material exhibiting high ultrasonic attenuation.
- Allows driving of long cables from remoy located sensors.
Features
- Withstands pulsed voltages up to 300 V for pulse widths in excess of 500 ns at PRF up to 10 kHz.
- Dimensions (W × H × L): 57 mm × 32 mm × 90 mm
- Weight: 300 g
- UT connectors: 8 × LEMO 00 female
- Water/moisture resistance: NEMA 4-IP66. Rustproof.
- Powered by an external 12 VDC source or from the instrument.
- Power connector: Compatible with standard Olympus umbilical cables (male Fisher 103 type)
- Red power-on LED indicator
- Operating temperature range: -10 °C to 60 °C
Specifications
Pulser
- Remote, high-voltage (200 V) pulse repeater
- PRF of up to 10 kHz at 100 ns per channel and up to 20 kHz at 50 ns for a single channel
- Pulser-side outputs protected against misuse and improper connection from the instrument outputs.
Preamplifier (Receiver)
- 40 dB preamplifier
- Accommodates probe frequency range from 1 MHz to 15 MHz.
- Preamplifier-side inputs and outputs protected against misuse and improper connection from the instrument outputs.
Options
- Power Cable (from TomoScan FOCUS LT)
5 m power supply cable linking to TomoScan FOCUS LT™ - Power Cable (from OmniScan)
10 m power supply cable linking to OmniScan® - Transformer and Cable
Transformer (120 VAC to 240 VAC input to 12 VDC output) with 10 m power supply cable
